![]()
HELPS PROTECT CHAIN LINK FENCES FROM WIND DAMAGE .
Featuring the latest Ballasted Wind Gate (BWG) technology, Aer-Flo® Ballasted Windscreen automatically opens to allow high velocity winds thru . . . NO MATTER THE DIRECTION OF THE WIND. PATENT PENDING. HOW DOES IT WORK ? |
![]() |
![]() |
![]() |
| Normal position: In calm to low winds. The subtle, two-tone color effect from alternate side installation of 5’ wide units is exaggerated here. | Storm position: In higher, non-playable winds, BALLASTED units open to allow damaging winds thru, PROTECTING FENCE & WINDSCREEN. |
Self Tie-Up feature: Built-in hook & loop strips at top allow one person to roll up and secure entire unit in less than 30 seconds. SAVES COSTLY LABOR TIME. |
HOW DOES IT SAVE MONEY? Aer-Flo® Ballasted Windscreen pays for itself by:
TECHNICALLY SPEAKING: Each 5’ wide section exerts a minimum of 15 pounds of vertical vector force, providing the correctly engineered amount of ballast to offset excessive unit billowing in normal sports-playable winds. When constant wind velocities exceed 25 mph, the Aer-Flo Ballasted Windscreen system provides a progressively increasing degree of wind force relief thru a series of opening “wind gates”, those units on the fence side in the wind direction. For winds up to 99 mph, wind force reduction may approach 47%, depending on fence post spacing, post diameter, pipe gauge, and steel quality. With units in tied-up position, the net wind force on fence may approach 93% less than that exerted on the same fence with conventional fully-attached windscreen of same size. PATENT PENDING.
USE IT WHERE YOU NEED IT: Made with more materials and additional workmanship, Ballasted Windscreen costs appreciably more per square foot than conventional windscreen. OVERALL COSTS CAN BE REDUCED SIGNIFICANTLY by following these installation guidelines:
1. For fence sections that suffer the greatest exposure to high winds, use 100% Ballasted Windscreen units. 2. For fence sections that have moderate exposure to high winds, mix in non-ballasted individual units of 10’ – 25’ so that 50-70% of section is covered by alternating Ballasted Windscreen. 3. For lower wind exposure sections, mix in non-ballasted units so that 20-40% of section is covered by Ballasted Windscreen. 4. For protected fence sections rarely exposed to high winds, use 100% Aer-Flo non-ballasted windscreen for a perfect match.
Though it costs more initially, Aer-Flo Ballasted Windscreen is a wise investment for those facilities that have experienced the RECURRING high cost of labor and materials before and after every high wind event.
SPECIFICATIONS
Ballasted Windscreen: Standard units are made with high quality vinyl coated polyester windscreen fabric. Standard colors are Dark Green and Black. Other colors available. SIZE: 5’ Width x 6’ Height only. Factory warranty.
Non-Ballasted Windscreen: ● Mix-in Units available in Widths: 10’, 15’, 20’, 25’ x 6’ Height.
● Normal windscreen: Any Width x Any Height in same colors. Competitively priced.
FAST DELIVERY: Standard units normally ship from stock. We take pride in our quick production of custom sizes.